How to Refill HP 02 Ink Cartridges

The quality of ink that you choose to use is verythe cartridge. A razor knife can come in handy.
important for best results. Refilling the HP 02 is4. Fill a syringe with about 10ml of ink, only use
simple and can save you hundreds of dollars in aaftermarket inks made for Hp 02's
short amount of time. Did you know that when5. Fill the cartridge until it is completely full. Don't
you buy new HP 02 cartridges from HP, thatleave air space in the cartridge.
you're spending thousands of dollars per gallon for6. Make sure the area around the hole is dry by
inkjet ink?blotting with a paper towel.
Here's a few points to remember about refilling7. Reseal the whole with plugs available online, or
HP 02 Ink Cartridges:with a hot melt glue gun.
- 02's are easy to refill and reuse numerous times8. Let the cartridge sit for a few moments over
- Do not touch the microchip on the cartridgea paper towel to check for leaks.
- Absolutely do not let your cartridge completelyHp 02 Refilling Tips:
run out of ink before refilling- Check the ink level in your cartridges often, if
Here are the basic steps to refilling the HP 02:you do alot of printing to make sure that the
cartridges don't run dry. This can damage your
1. Find the small recessed spot on the top of theprinter. Refill as soon as you see that they're
cartridge.getting low.
2. Use a small drill bit or drill tool to make a hole- If you do happen to touch the microchip on the
on the top of the cartridge in this recessed point.cartridge, clean with a pencil eraser.
You can also melt a hole with a soldering iron,The quality of ink that you use when refilling your
although a small drill bit will work just fine.Hp 02's is very important. You should only use
3. Clean away any excess debris from drilling theinks that are specifically manufactured to replace
hole so you have a nice clean hole to reseal. Makeoriginal Hp Vivera inks.
sure that the opening is flat with the surface of